When i had noises i would do a major cleaning and that solved my issues. 
best of luck.

You are right.  I had forgotten the original screen didn't allow one to make many changes.  I had upgraded my controller which boosted my performance and allowed me to make individual settings. 

Odd you don't have much throttle.  It may be wiring or it may be a bad controller. 

Area13 has an upgraded controller and color screen that will boost your performance. 

I have 6000 miles on my chain for a 2020 rover 5.  I've not had a problem with my chain.

have you checked the setting?

you may have fried the controller.   my guess is the motor is okay. 

Quote from: Lucius on May 19, 2024, 07:23:12 PMTo Be Improved:

• Not necessarily a fault of the bike, but I can't use the large rear basket because it hits my tailbone.  That got returned right away.

Rotate the rear basket 90 degrees and that will solve your problem.  But honestly the large one is too big for most grocery trips.  I can get nearly everything in on the smaller one. [/list]

why not use extensions? they are available.

is the chain loose?  maybe take a link out.

Contact Area13.  buy an aftermarket screen.  you might be able to buy a new screen through them.  I know you can buy a new controller and screen upgrade.  you will get a little more power with a color LED screen.  with the upgraded controller you will have only one screen not 2 as you have now. If they are out of stock, you will be put on a waiting list.

Quote from: bikebulle on May 10, 2024, 02:26:10 PMIs it this one? It says not compatible with Radrunner 1 but doesn't mention Radrunner 2. Does it connect to the original controller?

you should email them.  they can tell you if the Runner 2 isn't compatible.  They are good at responding.

Quote from: John Rose on May 04, 2024, 11:20:08 AMGreen on the charger means that it thinks the battery is charged, and the charging cycle is complete.

What do the LEDs on the battery look like when you press the test button?

The key must be inserted and turned to the ON position.
In this photo Red/Grn/Grn/Grn means it's fully charged.
[/quote

Manuals from older RAD batteries say battery must be turned off to charge. 

try a local bike shop.  they can get you want you need.  It shouldn't cost much.

yes identify which battery and which rad bike you are using.

add photos to help identify the year and model. also photo mileage.

you may have burned the wiring on the cradle where the battery plugs in.  It happened to me.  I tend to use throttle a lot and I have an upgraded controller so I send lots of juice through it. 

I replaced the connectors on both the battery and the cradle. 

Is your battery difficult to remove?  If so then it is a sure sign that you have burned the wiring.  Rads wiring is smaller than it should be.