Author Topic: RadMission assembly tips?  (Read 167 times)

ian13

  • Newbie
  • *
  • Posts: 1
    • View Profile
RadMission assembly tips?
« on: June 02, 2021, 04:09:21 AM »
I just ordered a RadMission, it'll be my first ebike and I'm so excited! I read the posts here and watched some YouTube videos on assembly and plan to give it a try myself and have a technician check my work. Any tips on assembly? I'm a little confused on the tools I need, will I need additional supplies on top of what's provided? Thanks!
https://tplinklogin.one/
https://sarkarijobs.gen.in
https://192-168-1-128.link/
« Last Edit: June 09, 2021, 11:52:14 AM by ian13 »

Sourtsu

  • Newbie
  • *
  • Posts: 1
    • View Profile
Re: RadMission assembly tips?
« Reply #1 on: June 13, 2021, 03:55:58 PM »
The only thing they don’t provide is the torque wrench, they should provide allen keys (4mm, 6mm, 8mm) a Philips head screw driver, and all the wrenches you need. The tools set is on the light side, so if you have your own tools they’ll certainly be more comfortable to use.

TarugoKing

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: RadMission assembly tips?
« Reply #2 on: July 29, 2021, 06:30:40 PM »
Well I received my wife's Radmission a couple of days ago and I assembled it today.

Here are some of my tips:
[1] Get a LOCTITE THREAD LOCKER (blue) for the bolts (faceplate, stem, etc.).
[2] Yup, as already posted, you need a TORQUE WRENCH to make sure you tighten the bolts correctly.
[3] If you bought the REAR RACK, you don't need to remove the rear wheel to install it. Use loctite with the original frame bolts but the rack also came with replacement bolts loctite ready. I didn't use it because I wanted a fresh one (not dry).