Rad Power Bikes Owners Forum

Discussions by Rad Model => RadRover => Topic started by: RadBod on May 14, 2022, 10:00:47 AM

Title: Rover 6 plus Controller
Post by: RadBod on May 14, 2022, 10:00:47 AM
Is the Rover 6 plus standard controller available for purchase, I am curious as to whether you could swap out an EU controller for an American/Canadian one?
Title: Re: Rover 6 plus Controller
Post by: Radding Along on May 16, 2022, 07:54:35 PM
The Rover 6Plus US controller is available for purchase. The cost is $159. Keep in mind, the High Step model and the Step Thru model controllers are different part numbers. So you will need to order the right one.

In fact, the Canadian controllers are different part numbers than the US version. And the EU part numbers are different as well.

I don't know what the difference is, or if there is any. I think the lower speeds dictated by Canada and the EU are controlled by the display. Just guessing on that.
Title: Re: Rover 6 plus Controller
Post by: sj22 on May 17, 2022, 10:29:21 PM
Quote from: Radding Along on May 16, 2022, 07:54:35 PM
The Rover 6Plus US controller is available for purchase. The cost is $159. Keep in mind, the High Step model and the Step Thru model controllers are different part numbers. So you will need to order the right one.

In fact, the Canadian controllers are different part numbers than the US version. And the EU part numbers are different as well.

I don't know what the difference is, or if there is any. I think the lower speeds dictated by Canada and the EU are controlled by the display. Just guessing on that.

Where? Looking for ST controller for Canadian 6+ to upgrade to US version for 750W.
Title: Re: Rover 6 plus Controller
Post by: Si1Dia on May 18, 2022, 02:14:43 PM
The problem with putting a US controller in an EU or CA rover 6+ is that your motor is not 750w. it is a 250W EU, and 500W CA. so you would need to replace both the motor and the controller to get the effect you are looking for.

These parts are even listed as different part numbers in the rad dataBase so they cannot be confused with each other.


(former Rad Employee before the layoffs)



Title: Re: Rover 6 plus Controller
Post by: RadBod on May 20, 2022, 08:18:35 AM
Quote from: Si1Dia on May 18, 2022, 02:14:43 PM
The problem with putting a US controller in an EU or CA rover 6+ is that your motor is not 750w. it is a 250W EU, and 500W CA. so you would need to replace both the motor and the controller to get the effect you are looking for.

These parts are even listed as different part numbers in the rad dataBase so they cannot be confused with each other.


(former Rad Employee before the layoffs)

Sorry about the layoff but thanks for the inside knowledge. I had previously been led down the wrong rabbit hole concerning the 750W motor. There was a discussion I stumbled on that all bikes in all countries have the same motor and were limited purely by the software. I guess I?m stuck with max. 250W.
Title: Re: Rover 6 plus Controller
Post by: msndave on May 20, 2022, 12:20:38 PM
Quote from: Si1Dia on May 18, 2022, 02:14:43 PM
The problem with putting a US controller in an EU or CA rover 6+ is that your motor is not 750w. it is a 250W EU, and 500W CA. so you would need to replace both the motor and the controller to get the effect you are looking for.

These parts are even listed as different part numbers in the rad dataBase so they cannot be confused with each other.


(former Rad Employee before the layoffs)

Sorry to hear about the layoffs. If you don't mind me asking, did Rad layoff people primarily in the mobile units or were the layoffs mixed with other service personal as well? The reason I'm asking is because there have been several people on Facebook saying that Rad service isn't what it used to be.  Thanks so much.
Title: Re: Rover 6 plus Controller
Post by: Si1Dia on May 22, 2022, 04:03:00 PM
Quote from: msndave on May 20, 2022, 12:20:38 PM
Sorry to hear about the layoffs. If you don't mind me asking, did Rad layoff people primarily in the mobile units or were the layoffs mixed with other service personal as well? The reason I'm asking is because there have been several people on Facebook saying that Rad service isn't what it used to be.  Thanks so much.

Mostly from the mobile service but also a few here and there all around the company. Product Support lost only 3 or 4 folks if I heard correctly. It was a great company to work for, sorry to have to go, but now off to bigger and better things. :)
Title: Re: Rover 6 plus Controller
Post by: msndave on May 24, 2022, 06:49:24 PM
Quote from: Si1Dia on May 22, 2022, 04:03:00 PM
Quote from: msndave on May 20, 2022, 12:20:38 PM
Sorry to hear about the layoffs. If you don't mind me asking, did Rad layoff people primarily in the mobile units or were the layoffs mixed with other service personal as well? The reason I'm asking is because there have been several people on Facebook saying that Rad service isn't what it used to be.  Thanks so much.

Mostly from the mobile service but also a few here and there all around the company. Product Support lost only 3 or 4 folks if I heard correctly. It was a great company to work for, sorry to have to go, but now off to bigger and better things. :)

Best of luck to you!  I hope you find another job that makes you happy.   :)
Title: Re: Rover 6 plus Controller
Post by: sj22 on May 26, 2022, 09:54:26 AM
Quote from: Si1Dia on May 18, 2022, 02:14:43 PM
The problem with putting a US controller in an EU or CA rover 6+ is that your motor is not 750w. it is a 250W EU, and 500W CA. so you would need to replace both the motor and the controller to get the effect you are looking for.

These parts are even listed as different part numbers in the rad dataBase so they cannot be confused with each other.


(former Rad Employee before the layoffs)
Hi, thanks for responding, bummer, I went with Rad because of their bike service/assembly options.
Can you post the numbers and where to buy them? I will buy both the motor and controller in that case. Still easier than selling current bike and rebuying in the US and biking across which is possible just a big hassle if there are service issues etc.
Title: Re: Rover 6 plus Controller
Post by: Si1Dia on May 26, 2022, 05:24:37 PM
Quote from: sj22 on May 26, 2022, 09:54:26 AM
Quote from: Si1Dia on May 18, 2022, 02:14:43 PM
The problem with putting a US controller in an EU or CA rover 6+ is that your motor is not 750w. it is a 250W EU, and 500W CA. so you would need to replace both the motor and the controller to get the effect you are looking for.

These parts are even listed as different part numbers in the rad dataBase so they cannot be confused with each other.


(former Rad Employee before the layoffs)
Hi, thanks for responding, bummer, I went with Rad because of their bike service/assembly options.
Can you post the numbers and where to buy them? I will buy both the motor and controller in that case. Still easier than selling current bike and rebuying in the US and biking across which is possible just a big hassle if there are service issues etc.

rad won't sell US parts in Canada. you would have to have a US address/account to have them shipped. They will also tell you that you will void the bike warranty by installing these parts. You just need to write or call in to Rad set up a US account, ask for the parts and hope for the best.