Hi,
I do not have my radrhino (radrover) at the place where i am now, but i need to buy some tools to repair the brakes on my bike.
Does anyone remember the specs for the two hex screws that hold the disk brake to the bike frame, i think it is 6 mm, or am i wrong, and how long are they?

Hi handelbar,
That is excatly how i will do i, but it will be next year, since the bike is here in my summerhouse, and we are leaving today 😀, but thanks for all your help!
Kind regards
Martin

Thank you for further info handelbar.
I may have found out what the problem could be, it i like when i activate the rear brake, one end of one of the brake pad, do not reach the disc, meaning that the two brake pads on each side of the disc, only use a part of surface to brake, and that limit the brake power.......if this  make sense......i need to try to adjust this.

Hi handlebar and Ddaybc,
Thank you very much for your very detailed explanation, i tried to adjust like yoy explain, but the brake still do not really block nice, like the front brakes, the backbrake is still very weak, is is strange with such a simple construction?.maybe it is because the cable to the back brake is longer, and there by more stretched, and thereby lot of the power are lost in stretch instead of being transfered to the brake?.

Hello,
I went on my Radrover, and found that the rearwheel break only brake very weak.
I tried to adjust them, but still not good brake power.
Then i changed the brakepads with new one......still now good, only very moderate brake function.
Has anyone observed similar, and how did you fix it?
The disk seems very clean, shall i try to clean it or sand it?

Hello,
We have a RadRhino (RadRover), and a RadRunner, and somethimes we would like to bring them with us, on tour with our car.
Can a standard rear car hook carry a RadRover and a RadRunner at the same time, and is there a recommendation for a rear rack for such two bikes, in Europe?

Actually i just want to buy the original Rad motor, i do not need the upgrade.

Hello,
Does anyone know if it is possible to buy a replacement plugin, plug and play, hub motor for a 2019 RadRhino bike, in europe, Rad only offer a complete rear wheel  including hubmotor.

Regards
Martin Olesen

Hi,
I got a older 2019 Radrover from a friend, i think the hubmotor is burned off, or the cable harness is sick.
Does anybody know if Rad sells rear wheel with motor as sparepart, and also the wireing harness, in Europe, and does anybody knows what it cost?

Hello handlebar, yes, you are right, it could be the solution.
Do you know if there is a drawing with wiring color code, that shows how this plug are connected, and are the colors of the wires, standard in this kind of plugs?
Also, do you think you could give me the link to the Amazon page with the extender cable?

Hello, the male connector for the power to the hub motor on my 2019 Radrover, has been ruined due to overload, does anyone know if somebody has ever replaced this connector, and if yes, do you know where i could find a link?
You can see the connector on the picture.

Hello handlebar, thank you very much for the description, today i will look for puncture, and investigate the inside of the tire, the strange thing is that i happend on both tires, within the same 24 hours.

Hi, i got a 2019 Radrover, and yesterday it suddenly lost all air in the rear wheel.
I could not find any leak in the tube.
Tonight it also suddenly lost all air pressure in the front wheel......
I do not think it is a puncture, is this a known problem, is there a ea a known problm with the valves, and can this be repaired?

Hello, my wife got the original green Rad Runner with the center stand.
She find it a bit difficult to lift and drag the heavy bike up on the stand, so she would like to have a side kickstand on it, like there are on the Rad Runner Plus.
In the meantime, i do not think that the original rad Runner have the little metal hole to mount the side kick stand, like the Rad Runner Plus have, so any ideas for what kickstand will fit to original Rad Runner?

Hi,
Any one knows if a 250 watt EU version Radrunner can be software modifyed into a 750 US version Radrunner with full trottle control.
In other words, id the EU version just a software downgraded US version, or are they also different dur to different hardware.....motor, controller, ect?