Awesome! Thanks that?s good enough. I can put spacers in so between 1-1.75 clamps with spacers will work 🙏🧡🌞♾

The diameter of the tube is 4?? 

I think
We
Are talking about something different. Did you see my picture. I?m looking for the diameter of that tube not the length. 🙏🧡🌞♾

hey any help?

Hey thanks for any help here RAD is of none. I have a RadWagon4 I put a custom seat on the back deck. I wanted to ad ATV 6 foot chaser LED whips to it for Burning man. The bike is in my container out in Gehrlach NV I'm in NY LOL. Looking to see if anyone with a bike can get me the diameter of the rear down tube on the RadWagon4. this is the tube running from the rear deck down the bike . On the orange bike its orange with a blue stripe so I can build up brackets or clams . the existing clamps fit 1.75-2".

The tube in question is circled in the attached pic thanks!!!

Any help is a blessing thanks in advance!

Adam

Hey thanks for any help here RAD is of none. I have a RadWagon4 I put a custom seat on the back deck. I wanted to ad ATV 6 foot chaser LED whips to it for Burning man. The bike is in my container out in Gehrlach NV I'm in NY LOL. Looking to see if anyone with a bike can get me the diameter of the rear down tube on the RadWagon4. this is the tube running from the rear deck down the bike . On the orange bike its orange with a blue stripe so I can build up brackets or clams . the existing clamps fit 1.75-2".

The tube in question is circled in the attached pic thanks!!!

Any help is a blessing thanks in advance!

Adam

Thanks Yes that is the plan. Do you think it fits mounted on the board up top or only below?

Quote from: Ryan on March 31, 2021, 11:42:13 AM
Well this is perfect timing! Here is the video of our installation of the Bolton Ebikes controller on my brother's RadWagon 4: https://youtu.be/5HDTTVN_QXY

<iframe width="560" height="315" src="https://www.youtube.com/embed/5HDTTVN_QXY" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

Ryan thanks awesome vid!! My controller arrives today for install on my radwagon 4. Any chance you guys did a template for the final controller board? Any help would be amazing and deeply appreciated. Thanks

Quote from: totsubo on May 12, 2021, 08:24:27 AM
That looks awesome.

Do you have pictures of how it is mounted that you can share?

Sorry do not have pics of the mounts  and It was very easy. They sent a clear heavy vinyl template with wholes drilled through It same size as the rack. . I layed that on the rack. Since it's clear you can true it up easily and then drilled 4 holes. They supplied machine screws  I put shoulder washers on them. Threaded from below the rack and into the captive nuts on the seat base. Very easy. Was a 5-10min operation. My girlfriend  says it's the most comfortable thing she's ever sat on. Highly recommend. He used my photos for the eBay listing as I'm the first to have this. I had sent him pics of the rack with ruler measures of It and he made It flawless first time without having the bike to fit It. Amazing

Quote from: wkindred on May 18, 2021, 12:49:58 PM

Quote from: aegert on May 17, 2021, 11:21:47 AM

Quote from: mailman390 on March 16, 2020, 07:42:05 PM
I bought the Juin Tech M1 on eBay.....paid $137 which was after taxes.

So I'm installing on the radwagon 4 and really having a tome getting the front not to rub any pointes.  I have the pads set at widest followed the bolton bid. Backs great front rub. Do not have any ideas

check the brake rotor...you may have a slightly bent one.

Yup figured that out that day. Did a sight bend back in truing up the rotor and then blessed silence lol.

Thanks

Quote from: mailman390 on March 16, 2020, 07:42:05 PM
I bought the Juin Tech M1 on eBay.....paid $137 which was after taxes.

So I'm installing on the radwagon 4 and really having a tome getting the front not to rub any pointes.  I have the pads set at widest followed the bolton bid. Backs great front rub. Do not have any ideas

Hey just received my new Rack Seat  Custom which will now be standard I believe. From Fabian DeSantiago In Texas. Black with orange thread Diamond. So comfortable. 3.5" thick Girlfriend says feels no bumps at all. I went looking for them LOL

The Seat was $200. He pre loaded the captive nuts and gave me a drill pattern was mounted on 10 mins with measure 3x drill once. PERFECT. I am not a shill here. just contracted the build . His email is

hipofighter@yahoo.com

found him on sleeze bay his store is at :

https://www.ebay.com/sch/hipofighter18/m.html?item=224430812006&rt=nc&_trksid=p2047675.l2562

Just sent him picks he said he will list this. Will make catapillar or diamond patterns you pick thread.

Hey awesome vids and info. You guys rock! Will be buying another rad wagon 4 for burning man and will
Totally use tour link. Thanks!!

Is there any chance to get a posted template or measurements of the wood board with hole layout?  I'd totally duplicate this for 2 bikes thanks so much in advance!

Adam

Hey all New here new buyer of 2 RadWagon 4's I'm looking for 2 sets:

Deck Pad

Running Boards

Please contact me Thanks!!!!

One love
A

Hey is this still available Id take it