Quote from: blanconet on May 28, 2023, 02:14:49 PM
Hey folks

I just got my upgrade controller kit installed today!
Throttle power works great but I'm not getting any PAS, can folks share their controller settings for me to compare with mine? I've got a Radwagon 4

I've attached my RW4 settings.  If you are not getting any PAS it is probably your PAS cable.  Try disconnecting and reconnecting it.

I got my kit from Area 13.  To mount it I used a piece of black HDPE 1/4 inch board (called starboard, it's a marine grade plastic) because I had some sitting around and because it won't absorb moisture and it's super easy to work with. 

Hi all, I'm new to the forum but I've been lurking for awhile.  Anyway, I have a RW4 and I recently installed the upgrade controller to try to get a little more help getting up some of the steeper hills around my hometown.  I am really loving it!  I watched Brett's youtube vid with his settings and used it as a starting point for my own settings which worked nicely.  The manual he links to is very helpful as well, but since I just got my controller, I noticed there has been at least one change made by the manufacturer, the addition of a setting C15 which is not in that manual and which I have found others were also confused by.  I located the manufacturer's website and found an updated manual which I wanted to link here, and I also wanted to note that the manual says the C15 setting is for walking speed.  It lists setting values of 4, 5, and 6 as walking speeds 4kph, 5kph, and 6kpg respectively.  I haven't reviewed the manual for changes other than that but just wanted to share the information with you all.  Here's the link:  http://www.szktdz.com/en/news.php?page=1&&&type=348.  I downloaded the manual "KT-LCDH P eBike Display User Manual_V3.0".  Hope this helps others.  Also, just wanted to note that Brett has C7 set to 0.  I would set it to 1 as it enables cruise control, which I have come to love!  To use the cruise control, you just hold the throttle at the speed you want and hold down the down arrow button on your PAS pad for a couple of seconds. Cruise is cancelled by hitting your brakes, hitting any key on the PAS pad, or pedalling for more than a few seconds.  Hope this helps someone!  Thanks.