Quote from: rjp on December 31, 2022, 06:21:33 PMMr tuffy on top of what comes with the bike or do I replace what is already in it? I?m sure mr tuffy alone won?t affect the ride. I?m just not sure about a double layer.
I had Tannus Armours in my tires but I got a puncher the first day, that didn't get to my tube. Glass just cut the tire. Then a little while later I got a puncher that got my tube right threw the Tannus. I removed the Tannus from that tire and installed a Mr. Tuffy liner and flatout in that rear tire. My front tire still has a Tannus Liner and Flat Out in it. I also had a flat on the rear tire from the rim liner cutting the tube. I must have moved the liner over to one side, while I was repairing that puncher I had, and the other side of the liner rolled up the side of the wheel. The rim liner is stiff plastic and the edge of it was sharp and stiff enough to cut the tube. So make sure Your rim liners are centered on the rim when you have your tires off. The Mr. Tuffy liners are thin and won't fill your tires or make your ride stiffer. I didn't notice any difference. Only have had 2 flats in 10500 miles. Good Luck