Author Topic: Radwagon 4 ; tire and inner tube  (Read 581 times)

Hayreddinli

  • Newbie
  • *
  • Posts: 3
    • View Profile
Radwagon 4 ; tire and inner tube
« on: October 18, 2023, 02:58:18 AM »
This is my first topic here. Various people have already responded to the tire discussion of the Radwagon 4 on various topics. I have also taken advantage of this and would like to thank everyone for the information.
I would like to share my experience with the tires of the Radwagon 4 that we have been using since the beginning of the year.

I used the Tannus Armor inner tube armor on both tires.
This caused a leak at the rear wheel due to a shift of the anti-puncture foam. I took out the foam, taped it and put it back again. But because the band is slightly narrower, it cannot have too much stretch. I later inflated both tires to 3 bar. And then the rear tire collapsed after use.
I'm starting to see cracks on the front tire. Hopefully that still goes well.

I have replaced the rear wheel inner tube and tire with a alternative brand. And I will pump both tires to about 2 bar. I don't think higher pressure goes well.

I may want to replace the front wheel inner and outer tire later as a precaution.

Inner tube Kenda 18-275/300 tr6

https://www.zandri.nl/binnenband-kenda-18-275-300-tr6.html

Tire 2.75-18 Kenda K254 4pr 41p

https://www.zandri.nl/buitenband-2-75-18-kenda-k254-4pr-41p-tt-tl.html

I have attached the photos of the old and new situation.

handlebar

  • Hero Member
  • *****
  • Posts: 581
    • View Profile
Re: Radwagon 4 ; tire and inner tube
« Reply #1 on: October 21, 2023, 07:13:15 PM »
I'd like to hear how the motorcycle tire performs.

Hayreddinli

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: Radwagon 4 ; tire and inner tube
« Reply #2 on: October 23, 2023, 02:14:51 AM »
The tire has been on it for almost 2 weeks now and so far so good. At first I had inflated it manually to try it out carefully. I noticed that it was cycling hard and couldn't get up to speed. I saw that it was at 1.5 bar and I further inflated it to just over 2 bar. Now the cycling is nice and smooth again.

I have reported the situation with the front tire to RAD and am waiting for a response. In the near future I will check the front wheel regularly and replace it if in doubt.

handlebar

  • Hero Member
  • *****
  • Posts: 581
    • View Profile
Re: Radwagon 4 ; tire and inner tube
« Reply #3 on: October 23, 2023, 06:04:39 PM »
How old is your front tire?

A motorcycle tire might be a solution for my Radrunner. The ISO size is 84-406 (16 x 3.3 ), and there aren't many options in bicycle tires.
« Last Edit: October 25, 2023, 02:18:39 PM by handlebar »

Hayreddinli

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: Radwagon 4 ; tire and inner tube
« Reply #4 on: October 24, 2023, 03:04:30 AM »
Front tire is now about 6 months old.

So far I am satisfied with the motorcycle tire on the rear wheel.

handlebar

  • Hero Member
  • *****
  • Posts: 581
    • View Profile
Re: Radwagon 4 ; tire and inner tube
« Reply #5 on: October 25, 2023, 02:17:33 PM »
Front tire is now about 6 months old.

So far I am satisfied with the motorcycle tire on the rear wheel.

My Radrunner tires are nearly 3 years old. After a year, I thought my rear tire had cracking. I thought it might have come from the day I reduced pressure to .7 bar to ride on snow, or the time I rode a few feet before seeing that the back tire was flat. Yesterday, I examined it closely. The tire isn't cracked. It's a transparent sticker with white lettering. The sticker is cracked, and the transparent part looks like the sidewall.

I hope Radpower gives you a good answer.

Rad Power Bikes Owners Forum

Re: Radwagon 4 ; tire and inner tube
« Reply #5 on: October 25, 2023, 02:17:33 PM »