Author Topic: Torque wrench useage  (Read 332 times)

flhtci2006

  • Newbie
  • *
  • Posts: 22
    • View Profile
Torque wrench useage
« on: June 16, 2020, 01:55:10 AM »
The Rad Power videos do not show how to properly use a torque wrench.   In fact, if you hold the torque wrench as many of the views show, you will overtorque the item.   Here is a youtube video that shows how to use a torque wrench.    There are many, I just picked this one.   The key is, grip the torque wrench at the handle, not the body.  https://www.youtube.com/watch?v=3v3hLvuO_KU

rogersan

  • Newbie
  • *
  • Posts: 1
    • View Profile
Re: Torque wrench useage
« Reply #1 on: July 22, 2020, 03:57:15 PM »
Very helpful link. Can you share from experience what size of a torque wrench is most useful on these bikes, or does one need all three as depicted in the video?

JeffGo

  • Newbie
  • *
  • Posts: 11
    • View Profile
Re: Torque wrench useage
« Reply #2 on: July 22, 2020, 05:28:46 PM »
You only need a 1/4" for working on most things relevant to assembly of a RAD, larger ones will get in the way of many fasteners and the scales are usually higher. And pretty much every fastener you would touch would be 4 or 5mm, maybe a 6mm.